Scuff Plate, Side Sill
1.Resin PP+EPDM-TD30 2.Oversize 1040X206X96mm 3.Wall thickness 2.7mm 4.Weight 874g
VW326（A-SUV）Fr Scuff plate Rh&Lh
Mold oversize 1650X1320X1270 (mm)
Cavity oversize 1450X1160X350 (mm)
Core oversize 1450X1160X320 (mm)
Through calculation and analysis, the MA1300 injection molding machine was selected, and its injection weight satisfies the requirements of plastic parts. The distance between the rods is 1350×1280, and the thickness of the mold is allowed to be HMAX=1300 and HMIN=500.
In order to reduce injection pressure loss and even filling, control part deformation and improve the quality of plastic parts, the HRS 10-point needle valve hot runner is adopted by MOLD FLOW software analysis.
The cavity is made with 1.2738.
The core is made by Baosteel 718.
The mold base is made of S50C and has a hardness of 170~220HB.
The cavity fixing plate adopts S50C (tempering treatment) and the hardness is 26~30HRC.
The top plate is made of P20H and has a hardness of 28~30HRC.
Standard parts are purchased according to the RFQ.
Core side cooling line